MAXLOG M-8800 Mobile VER 6

10 Meter Mobile EXPORT Transceiver

P.C PROGRAMMABLE CHANNEL/BANDS/FUNCTIONS

Pc cable and software included in price

GENERAL SPECIFICATIONS
Frequency Coverage: 25.165 to 30.115 Mhz
Antenna Impedance: 50 ohm, unbalanced
Frequency Control: Digital Phase-Lock Loop (PLL) Synthesizer
Frequency Accuracy: Better than +10 ppm from 0 - 40 °C after 15 min. warm up
Power Requirement: 12 -13.8 V DC, negative ground
Current Consumption: 9 amps maximum
Dimensions: 6 x 2 x 9.5 in (W x H x D)
Weight: 2.9 Ibs

TRANSMITTER SPECIFICATIONS
Power Output: SSB/CW/ FM...40+ Watts, ...AM..10 Watts RMS / 40+ Watts PEP
Tuning Steps: 1/10/100hz /1 kHz /10 kHz
Final Transistors: IRF520 MOSFET (x2)
Spurious Emissions: More than 50 dB below peak output power
Carrier Suppression: More than 40 dB below peak output power
Unwanted Sideband: More than 50 dB below peak output (1 kHz tone)
FM Deviation: +/- 5 kHz maximum
Audio Response: More than 30dB below peak output
Frequency Response: 400 to 2800 Hz
Microphone Impedance: , 600 to 1 K ohms

RECEIVER SPECIFICATIONS
Circuit Type: Dual-Conversion Super-heterodyne
Intermediate Frequencies:
1st IF/SSB/CW IF...10.695 MHz
2nd IF...455 kHz
Sensitivity:
SSB...0.25 V at 10 dB S + N/N CW...0.25 V at 10 dB S + N/N
AM...1.0 V at10dBS+N/N
FM...0.3 V at12dBSINAD
Selectivity:
SSB...4.2 kHz (-6 dB) / 8.5 kHz (-60 dB) CW...4.2 kHz (-6 dB) / 8.5 kHz (-60 dB)
AM / FM...6.0 kHz (-6 dB) /18 kHz (-60 dB)
Clarifier Range: full coverage of the radio! in 1hz/10hz/1khz/10khz steps!
Adjacent Channel Rejection: Better than 70 dB
I F Rejection: Better than 85 dB for all frequencies
Frequency Response: 250 to 3000 Hz
Audio Output Power: 2 watts minimum at 10% THD with an 8 ohm load
Audio Output Impedance: 8 ohms 
RF Power Output 40W SSB/CW (pep)/ 10W AM (rms)/ 40W FM (rms)                       
Dual Finals on Heat Sink
Modes AM, FM, USB, LSB,CW
Microprocessor Controlled
6 x 60 memories
Frequency Scan
Variable RF Output Power all modes
7 Digit LCD Frequency Display
Scanning Microphone step in 1/5/10/100khz steps
Night Illuminated Display blue/green led
Surface Mount Technology throughout
Dimensions 2(H) x 6(W) x 9.5(D) in

PIN 1 - EARTH
PIN 2- MIC AUDIO
PIN 3- TX PTT
PIN 4 -RX

What's in this package?
- Mobile bracket with screws
- Microphone
- DC cable
- Replacement fuse
- Manual in English language

CertificateCE,ROHS

Warranty:
90 day standard yeti communications R.T.B warranty concurrent with the 1 year factory standard warranty.

Manufactor: Maxlog