http://www.yeticomnz.com

Yeti Communications

 ICOM IC 7000   HF/VHF/UHF

  CALL $NZD Couriered to your location

ICOM IC7000  H.F/VHF/UHF Amateur Transceiver  

GENERAL
• Frequency coverage
Receive 0.030–199.999MHz    400.000–470.000MHz
Transmit 1.800– 29.999.9 50.000–54.000MHz
136.000–174.000MHz 400.000–470.000MHz
• Mode : USB, LSB, CW, RTTY, PSK31, AM,
FM, WFM (Rx only)
• No. of memory channels : 503 (495 regular, 2 call, 6 scan edges)
• Antenna impedance : 50 Ω (SO-239×2 for HF/50 MHz and
VHF/UHF)
• Power supply requirement : 13.8V DC ±15%
• Operating temp. range : –10°C to +60°C; +14°F to +140°F
• Frequency stability : Less than ±0.5ppm (+0°C to +50°C)
• Current drain : Transmit Max. power 22A
Receive Standby 1.3A
Max. audio 1.6A
• Dimensions (W×H×D) : 167×58×180 mm; 69⁄16×29⁄32×73⁄32 in
(projections not included)
• Weight (approx.) : 2.3kg; 5.1lb
TRANSMITTER
• Output power :100 watts
• Spurious emissions : Less than –50dB (Below 30MHz)
Less than –60dB (Above 50MHz)
• Carrier suppression : More than 50dB
• Unwanted sideband : More than 50dB
suppression
RECEIVER
• Intermediate frequencies :
SSB/CW/AM/FM 124.487MHz, 455kHz, 16.15kHz
WFM 134.732MHz, 10.700MHz
• Sensitivity (preamp on; except 4–4.5 and 8–9 MHz):
• Squelch sensitivity : SSB Less than 5.6μV
(threshold; pre-amp on) FM Less than 0.3μV
• Selectivity :
SSB (BW=2.4kHz) More than 2.4kHz/–6dB
Less than 3.9kHz/–60dB
CW (BW=500Hz) More than 500Hz/–6dB
Less than 900Hz/–60dB
RTTY (BW=350Hz) More than 360Hz/–6dB
Less than 650Hz/–60dB
AM (BW=6kHz) More than 6.0kHz/–6dB
Less than 15kHz/–60dB
FM (BW=15kHz) More than 12kHz/–6dB
Less than 20kHz/–60dB
• Spurious and image rejection ratio:
HF bands More than 70dB
50/144/440MHz More than 65dB
(except 144MHz IF point)
• Audio output power : More than 2.0W (at 13.8V DC)
(8Ω load, 10% distortion)