PowerBand RFX-75 75-100 watt replacement R.F Power Stage for 12-10 meter Transceivers.

Available  now  

THIS WILL NOT EFFECT YOUR CURRENT WARRANTY WITH US IF YOU BROUGHT YOUR RIG FROM YETI. 

        (cost of sending YOUR rig to YETI at YOUR cost.)

RFX-75 RF FINAL replacement stage

NOTE!

The RFX75 replaces the transceiver’s final amplifier stage and low pass filter section.

 The RFX75 is NOT a standalone amplifier.

The RFX75 mounts to the back of most transceivers with little or no modification to
the transceiver’s chassis.

If you did not know the current supply of rf final transistors is drying up worldwide as manufactures are shifting to using mosfet finals which require modifications to be done to the existing cb/ham radios for them to work as a replacement for the older now defunct rf transistors,.

The RFX75 is a RF final output stage and low pass filter designed as a replacement and/or upgrade for most 10-
meter amateur transceivers. The RFX75 features the latest Power MOSFET technology and a built in S-meter
detection circuit. The output power of the RFX75 varies depending on the transceiver that it is installed on. Most
installations will see 75 – 100 watts PEP output power.Frequency Range:         24-30 Mhz  12-10 Meter Bands 

.Power Requirements:    DC 13.8 volt 24amps max

Output Power max:       AM/FM 15 carrier 100 Watts pep max 

                                     S.S.B :  100 watts Max         

Modes:                         C.w-F.m-S.S.B  

lLow Pass Filter            3 Stage

Reverse polarity protection

Size:                              3 3/8 x 1 5/8 x 2 in    

    SPEC SHEET PDF DOWNLOAD

   INSTALL GUIDE FOR EPT3600 EXPORT RIGS  PDF DOWNLOAD

   SCHEMATIC DIAGRAM SHEET PDF DOWNLOAD

   MOUNTING TEMPLATE DIAGRAM PDF DOWNLOAD